Saturday, April 18, 2015

SMART SWITCH






          Tsh 150,000/=







  

Features:
New Cellphone Phone PDA GSM RC Remote Control Socket Power Smart Switch
Brand new and high quality.
You can control the GSM switch through rings or short messages.
It can control water heaters, electric motors, electric doors, lights, rice cookers and other appliances.
Whether you\\\'re on the road or in the office, easy and low-cost to control remote appliances:.
Wireless remote water pump.
Control the rice cooker in the office.
Wireless control lights, fans.
Wireless control power, audio and other equipment.
Feeding the family pet via the GSM switch.
Other household or industrial control applications.

Specification:
Rated voltage: 110V-220V
Rated current: 10A
Rated frequency: 50Hz
Rated Power: 2200W
Inherent power ≤ 0.2W
Original box: Yes
Item size: 99*59*32mm
Package size: 106*71*64mm
Net weight: 168g
Package weight: 177g













Description:
Use mobile phone call or send message to this GSM switch to switch on/off the power socket, that to control the electrical appliances. It works in any places with GSM signal available, what means you could cook rice in office, feed pets during trip.

Work with home and industrial electric appliances, like water heaters, electric motors, electric doors, lights, rice cookers, water pump, etc.
This product only works with 110V ~ 220V AC voltage range, can not be used in cars, or other voltage environment.
This product can only control the power supply switched on or off, do not have other functions. For some electrical appliances, such as some air-conditioning to maintain the function is not powered off, re-connect the power, will not immediately work. For the state to maintain electrical power, such as most of the TV, stereo can immediately work.
A: Basic setup and operation.
1. Install SIM card Installed your SIM card before power on, non-installed SIM card after power on!A short initialization time (30 seconds) after power on, related operations after initialization. GSM switch is disconnected by default.
2. Waiting for SIM card to connect the GSM network (according to local operators and signal level, usually about 1 minute to get into the network), and observe the SIG lights on the panel (the start is 1 second flash), when flash becomes 4 seconds, the proof has entered the GSM network, Then you can set and control the associated operation.
3. Set Password Must set up the user password first, GSM switch initial password is: 000000. Set Password command format: "SN + 6 old password + NEW + 6 new password. " For example, customers want set their passwords to : "123456", then he should edit the message content: "SN0000NEW123456" issued to GSM switch, if you set successfully, you will receive the message: "NEW SN SETOK NEW SN IS 123456 (New password). "The password with the power-down memory function. (Only support 0-9 Arabic numbers, otherwise it will prompt an error.)
4. Set master number GSMSW-A1 owners can set up 10 groups of master numbers, The seting format is: "SN +****(password) + SET + master numbers",send to the number of GSM switch, you can set the master numbers, such as the user's password is 1234, trying to set 13788889999 to master number, and then edit the message content: "SN1234SET13788889999" issued to GSM switch, if successfully,you will receive a message: "13788889999SETOK". Only the master number can control the outlet by dialing, when the master number dial number of GSM switch, the switch status will change, and then hang up automatically after one second, does not produce any cost. master numbers with a power-down memory function.
B: SMS Control (COM order, ON order, OFF order)
1. SN+6 passwords+COM+three socket state mark (For example: SN000000COMNFN, control SW1 ON, SW2 OFF, SW3 ON)
2. ON order control 3 switch connected at the same time: SN+6 passwords+ON
3. OFF order control 3 switch disconnected at the same time: SN+6 passwords+OFF
4. Check command: check the status of the socket: SN+6 passwords+CHECK
C: Telephone Control:
1. Setting 3 sockets ON: SW1: 1+* key SW2: 2+* key SW3: 3+* key
2. Setting 3 sockets OFF: SW1: 1+# key SW2: 2+# key SW3: 3+# key
D: Switch button control: through the keys of SW1 to SW3, can reversal the status of the plug of SW1 to SW3.
Warning:
When you insert the card slowly! it should slip into the slot smoothly, if not, do not come hard.
1. SIM card requirements: global GSM standard SIM card can be used, currently does not support 3G or CDMA card, please activate the new SIM before insert the device.

2. Do not place the GSM switch in the tin trunk or metal enclosed environment, this will cause the signal unable access GSM network or worse, affect the actual use.
3. Incoming Caller ID display must be turned on,make sure that SIM card has sufficient balance in order to call and send text messages.
4. When the the signal is weak in some environment, it will make SMS controlled no that ideal, and this is normal. Because the message communication needs transit point forward, it will send to the other number on time when in a good signal. In such circumstances,if you want to set the master number, consider to use SET button to set master number will be more efficient.
5. SMS or phone in the control, not to operate the buttons at the same time, this will cause system instability.
6. Using the product should pay attention to moisture, limited to indoor use.
7. Power do not work more than 2200W, inductive load power by half. Rated voltage is 110V-220V, please use in a safe environment, to ensure safety.
Package Included:
1 × Phone GSM Remote Control 3 Socket Power Outlet Smart Switch
1 × Power Cord

No comments:

Post a Comment